Vernier EasyData Guidebook Bedienungsanleitung PDF herunterladen (Seite 20)

EasyData Guidebook 19

In Single Point mode, EasyData samples readings from the sensor for a 10

second period. When sampling is finished, the mean reading is calculated and

displayed. Each time a reading is collected, it is stored in memory for future use. If

you wish to clear previously collected data, select New from the File menu.

To collect data in Single Point mode

This example uses an EasyTemp and a TI-84 Plus calculator. Your screens will

vary depending on which sensor and data-collection device is attached.

1. Turn the calculator on, and start the EasyData app.

After a few seconds, the EasyData main screen is

displayed. The screen shows the current EasyData

mode and the current sensor reading.

2. From the EasyData main screen, select

, and

then select Single Point.

3. Select

to begin collecting data. EasyData collects

data for 10 seconds.

When data collection has finished, the averaged

reading is displayed.

4. If you wish to keep the reading and prepare EasyData

to take another, select

If you are finished and no other readings are to be

taken, select

5. To collect another reading, repeat Steps 3 and 4.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 66 67

Keine Kommentare

Vernier EasyData Guidebook Bedienungsanleitung Seite 20